Vibration Transducers
| PZ Series and VEL-G Series A range of Vibration Sensors to cover most applications. From standard industrial through to specialised nuclear, submersible and high-temperature applications. |
Datasheet No. Click on the link to download |
Application Contact the Sensonics team for further guidance |
| PZS Industrial Accelerometer (Shear Mode) IEPE type, 100mV/g to 500mV/g sensitivity, ATEX / IECEx Operation to +140°C with broadband performance 0.4Hz – 10kHz Various connector and cable options |
DS1263 | Industrial Vibration Monitoring for Pumps, Fans, Motors, Centrifuges, Gearboxes, Compressors and Process Equipment. |
| PZV Industrial Velocity Vibration Sensor (Shear Mode) IEPE type, 4mV/mm/s sensitivity, ATEX / IECEx Operation to +140°C with broadband performance 2Hz – 6kHz Various connector and cable options |
DS1264 | Industrial Steam Turbines and large machines require cyclic vibration monitoring (as opposed to impulse/high-frequency vibration). |
| PZDC 4-20mA Loop Powered Industrial Velocity Vibration Sensor (Shear Mode) +15.0 to +35.0V operation, various velocity ranges, ATEX / IECEx Operation to +140°C with broadband performance 10Hz – 1kHz Various connector and cable options |
DS1265 | Direct DCS/PLC/BMS integration for Pumps, Fans, Motors and Process Equipment. |
| VEL-G Moving Coil Velocity Range Self generating output, 4mV/mm/s – 20mV/mm/s sensitivity Frequency response 4.5Hz – 2kHz, ATEX / IECEx |
L125 | Industrial Steam Turbines and large machines in heavy industrial/high noise environments. |
| VEL-GLF Moving Coil Velocity Range Low Frequency IEPE type, 20mV/mm/s sensitivity Frequency response 0.5Hz – 1kHz, |
DS1248 | Slow rotating plant such as hydroelectric generators/pumps, wind turbines & cooling fans where high sensitivity is also a requirement. |
| VEL-GDC 4-20mA Loop Powered Moving Coil Velocity Vibration Sensor +15.0 to +35.0V operation, various velocity and displacement ranges, Operation to +100°C with broadband performance 10Hz – 1kHz |
DS1241 | Direct DCS/PLC/BMS integration for Pumps, Fans, Motors and Process Equipment. |
| SP4 Short Period Seismic Accelerometer 2V/g to 50V/g sensitivity, broadband performance 0.1Hz – 1kHz Internal calibration facility, side cable exit |
DS1199 | Strong motion seismic applications, structural monitoring and wind turbines. |
| Willmore Short Period Seismometer Short period adjustment 1 – 3 seconds, very high sensitivity Dynamic Range >140dB, |
DS1245 DSL022 |
Geotechnical applications such as seismology, mining and exploration. |
Other Accelerometers
| PZ Series Accelerometers Applications include embedded, charge output and high temperature |
||
| PZS1, IEPE, single case, for embedded applications, 16grams | DS1160 | Embedded bearing monitoring and smaller machines. |
| PZXY, IEPE, dual case, triaxial, single point mount, 140°C | DS1165 | Structural monitoring and turbine pedestal vibration. |
| PZHT, 3-wire, 100mV/g, four-hole mount, 240°C | DS1109 | High-temperature vibration monitoring e.g. Gas Turbines. |
| PZEHT, 3-wire, 10mV/g, MI cable, four-hole mount, 450°C | DS1219 | Very high-temperature vibration monitoring e.g. Gas Turbines. |
| PZP1, Charge output, 20pC/g, top exit, microdot conn, 27grams, 200°C | DS1101 | Nuclear robust vibration monitoring and generator winding vibration. |
| PZP2, Charge output, 100pC/g, top or side exit, 72grams, 200°C | DS1102 | Nuclear robust vibration monitoring and generator winding vibration. |
| PZCS (QZA), four-point mount, 50uA/g, MOD approved, 90°C | DS1110 | General vibration monitoring and suitable for marine applications. |