Whats New

MACHINE MONITORING August 2012

COST-EFFECTIVE & FLEXIBLE MACHINE MONITORING

Condition monitoring specialist SENSONICS has introduced a vibration data collection and analysis service for the benefit of all industrial plant users which aims to minimise downtime and maximise productivity.

Read the full story, click here



TURBINE SUPERVISORY SUCCESS FOR SENSONICS IN ASIA June 2012

TURBINE SUPERVISORY SUCCESS FOR SENSONICS IN ASIA

Sensonics are enjoying continued success both at home and in Asia with new contracts for their Innovative Sentry G3, high performance machine protection system. In addition to a number of successful installations at power plants in China is another project in Vietnam at the PhaLai Thermal Power plant.

Read the full story, click here



COMPACT, AFFORDABLE PROTECTION FOR SMALL TO MEDIUM MACHINES April 2012

COMPACT, AFFORDABLE PROTECTION FOR SMALL TO MEDIUM MACHINES

A new compact and cost-effective machinery protection monitor capable of monitoring two channels of bearing vibration, shaft vibration or shaft position has been introduced by SENSONICS. The DN26 G3 unit is a Din rail mountable module which has been designed specifically for machine monitoring and protection applications such as, fans, pumps, motors, centrifuges, turbines or any small to medium industrial machinery requiring reliable protection.

Read the full story, click here



ATEX APPROVAL FOR SHAFT VIBRATION AND THRUST TRANSMITTERS November 2011

ATEX APPROVAL FOR SHAFT VIBRATION AND THRUST TRANSMITTERS

Machine Protection and Condition monitoring specialists SENSONICS has  enhanced its range of DN803X series shaft vibration and thrust position transmitters following approval for intrinsically safe applications.  The DN8031 (vibration) and DN8033 (thrust position) proximity probe systems are now suitable for Ex ia IIC T4 applications when used in conjunction with Sensonics ATEX approved range of AECP proximity probes and AEXC extension cables.

Read the full story, click here



PROXIMITY PROBE WITH REAR AND SIDE VIEW TARGET PROTECTION July 2011

PROXIMITY PROBE WITH REAR AND SIDE VIEW TARGET PROTECTION

Condition monitoring specialists SENSONICS have added a new option to their established range of proximity probes which virtually eliminates the detrimental effects on measurements caused by both side and rear targets. The PRSVBeam proximity probe has an innovative tip design which overcomes the problems associated with traditional probe designs, such as poor accuracy, system non-linearities and extended set-up time.

Read the full story, click here



ACCELEROMETERS FOR WIND TURBINE APPLICATIONS April 2010

ACCELEROMETERS FOR WIND TURBINE APPLICATIONS

The established range of SENSONICS PZS accelerometers have been extended to provide a vibration monitoring solution for wind turbine applications. The proven shear mode constructed PZS accelerometer series have been supplied for many applications, including wind turbine monitoring over the past 5 years. This enhancement of the product range provides a frequency response down to 0.1Hz and permits effective monitoring of both the wind turbine main shaft and input gearbox bearings below rotational speeds of 20RPM.

Read the full story, click here



DN8033 thrust and rod drop transmitter August 2009

THRUST AND ROD DROP DIRECT TO DCS

We have enhanced our range of DN monitors with the introduction of our DN8033 thrust and rod drop transmitter. This unit is designed to measure shaft axial or rod position on a range of rotating plant. The 4-20mA loop powered module provides easy integration with either the local machine PLC or a plant wide DCS since it is powered through the measurement loop. The unit operates in conjunction with Sensonics Senturian range of 8mm diameter proximity probes, offering a maximum measurement range of ± 1mm.

Read the full story, click here


Sentry G3 machinery protection monitor April 2009

MORE FEATURES, MORE FLEXIBILITY WITH SENTRY G3

Condition monitoring specialists SENSONICS have introduced the Sentry G3 machinery protection monitor, a high performance signal conditioning unit. The new G3 monitor builds upon the established range of Sentry protection systems developed by Sensonics and is designed to be the most flexible and feature rich Turbine Supervisory System available. It provides a universal platform for the interfacing of various sensor types in compliance with the API 670 standard.

Read the full story, click here


Temperature Accelerometer for gas turbines NEW HIGH TEMPERATURE ACCELEROMETER FOR GAS TURBINES

A vibration transducer capable of operating in excess of 450°C is now available from Sensonics. The PZEHT offers ICP type connectivity by separating the high temperature element from the signal conditioning electronics, connecting by means of a hard line cable.

For more details, click here