Vibration Transducer Product Catalogue
Vibration Transducer Product Catalogue
 
Guide to Selecting the right vibration transducer
Guide to Selecting
the right vibration transducer
 

Velocity Transducers

Sensonics offer a range of both piezo electric and moving coil velocity transducers (Velometer®) for applications requiring a vibration velocity signal direct from the sensor. These transducers are particularly suitable for applications requiring high sensitivity or for use in high electrical noise environments where integration of an accelerometer signal in the vibration monitor is not preferred due to unwanted signals induced on interconnecting cables. The moving coil type of velocity transducer is sometimes preferred for steam turbine bearing measurement applications where steam noise can saturate the output of piezoelectric accelerometers. A summary of the velocity transducer product range is detailed below.

PZV Piezoelectric Velocity Range

ICP® type, 4mV/mm sensitivity
Operation to +120 °C with broadband performance 2.5Hz – 6kHz
Dual SS316 Case EMC shielded, sealed to IP68
MIL connector or armoured cable
ATEX Ex ia IIC T4
  View Datasheets »
Sesonics PZV Piezoelectric Velocity Range Tranducer

PZDC 4-20mA Loop Powered

4-20mA current sink configuration
Up to 0 – 50mm/s range
Operation to +120 °C with broadband performance 2.5Hz – 6kHz
Single SS316 Case, sealed to IP68
ATEX Ex ia IIC T4
  View Datasheets »
Sensonics PZDC 4-20mA Loop Powered Velocity Transducer

VEL-G Moving Coil Velocity Range

Self generating output, 4mV/mm/s – 20mV/mm/s sensitivity
Frequency response 4.5Hz – 2kHz
Operation to +200 °C with dual SS316 case
ATEX Ex ia IIC T4
  View Datasheets »
Sensonics VEL-G Moving Coil Velocity Range Transducer

A range of proven Velocity Transducer designs based on 30 years of experience are available to fulfil your measurement application.
 
Quick Links